Service manual

42 - FORM NO. 56043098 - Convertamatic
™
24C, 24D, 26C, 26D, 28C, 28D
WHEEL DRIVE SYSTEM
DRIVE MOTOR TRANSAXLE REMOVAL CONTINUED
4 See Figure 5. Jack the front of the machine from this location until the drive wheels are approximately 1” off the ground.
5 Remove the (8) Locknuts (A) and then remove the (2) Drive Wheels (B) from the transaxle.
6 Disconnect the drive motor wiring connector.
7 Remove the (4) Motor Mount Bolts and Nuts (C) and carefully slide the Motor Transaxle (D) away from the machine.
8 Reinstall in reverse order.
FIGURE 5