Service manual

FORM NO. 56043098 - Convertamatic
™
24C, 24D, 26C, 26D, 28C, 28D - 43
WHEEL DRIVE SYSTEM
DRIVE WHEEL REMOVAL
WARNING!
Disconnect the battery pack connector before servicing machine.
WARNING!
Never work under machine without safety stands or blocking to support the machine.
1 Remove the squeegee and place wood blocking in front and rear of the opposite drive wheel that you are removing to prevent the machine from rolling.
2 Using a scissors jack, raise the machine until the wheel is off the ground. See Figure 6 for jack placement.
3 Remove the (4) Locknuts (E) and Drive Wheel (F).
4 Reinstall in reverse order.
FIGURE 6