Service manual

FORM NO. 56043098 - Convertamatic
™
24C, 24D, 26C, 26D, 28C, 28D - 73
Item Description
1 Solution Tank
2 Shut Off Valve
3 Inline Solution Filter
4 Recovery Tank
5 Extended Scrub Filter
6 Extended Scrub Stop Switch
7 Extended Scrub Start Switch
8 Vacuum Shut Off Switch
9 Extended Scrub Pump
10 Solution Pump
11 Reducer Coupler
12 Solution Solenoid Valve
13 Reducer Coupler
14 Tee
15 Extended Scrub Solenoid Valve
16 Solution Manifold (Cylindrical Models)
17 Tee
EXTENDED SCRUB SYSTEM PLUMBING SCHEMATIC
APPENDIX
Service Note:
1 After each use, drain and rinse the recovery tank thoroughly and then fi ll the recovery tank with
about 2 gallons (7.57 liters) of clean water.
2 Push and hold the Extended Scrub Button (G) for 3 seconds ( the indicator (Q) will turn green) to
initiate the purge function. The purge will run for 20 seconds. NOTE: This is to fl ush any debris
from the system. If you do not do this, the extended pump and(or) solenoid valve could become
plugged up with debris.
revised 8/05