Quick Start Guide

It’s really important to the loudspeakers EL-300 to have the bass drivers inside so face to face.
In some cases of reverberation room whose walls are far more than a metre of loudspeakers, it’s
possible to reverse the loudspeakers position.
Test carefully on several CD.
The EL200 loudspeaker should not be used directly on the ground, but on a stand or on a shelf
without any vibration.
To use verticaly the EL200 loudspeaker ( as a central loudspeaker), please use the base joined
into the packaging.
Wiring system :
Please check if all the material is switched off before starting the connections.
To connect the loudspeakers, use a quality cable with polarity mark. You can identify the positive
side by a stripe at the end of the cable or another mark (ie : +).
MONO OR BI-WIRING