Quick Start Guide

obtain the better sound.
It’s really important to the loudspeakers K5 and K7 to have the bass drivers inside so face to
face. In some cases of reverberation room whose walls are far more than a metre of loudspea-
kers, it’s possible to reverse the loudspeakers position.
Test carefully on several CD.
The K3 loudspeaker should not be used directly on the ground, but on a stand or on a shelf
without any vibration.
Wiring system :
Please check if all the material is switched off before starting the connections.
To connect the loudspeakers, use a quality cable with polarity mark. You can identify the positive
side by a stripe at the end of the cable or another mark (ie : +).
K5 and K7 installation
Speakers terminal K5 and K7