Quick Start Guide

obtain the better sound.
It’s really important to the loudspeakers K5s, K7s and K9s to have the bass drivers inside so
face to face. In some cases of reverberation room whose walls are far more than a metre of
loudspeakers, it’s possible to reverse the loudspeakers position.
Test carefully on several CD.
The K3s and K center loudspeakers should not be used directly on the ground, but on a stand or
on a shelf without any vibration.
Wiring system :
Please check if all the material is switched off before starting the connections.
To connect the loudspeakers, use a quality cable with polarity mark. You can identify the positive
side by a stripe at the end of the cable or another mark (ie : +).
K5s/K7s/K9s installation
Speakers terminal K5s/K7s/K9s