User manual

Capturing Traffic | 65 of 173
Bluetooth Explorer 400
If a recording is initiated without having first selected an analyzer, the
Available analyzers
dialog will pop up to request the user to select an analyzer.
Selecting the default checkbox in this dialog will conveniently force the
automatic selection of the specified analyzer on each new recording.
6.4 Initiating a Recording
A recording can be initiated from the toolbar, keyboard, or the menu.
To initiate a recording:
1. Click on Record
on the toolbar.
or
Select Record | Start Recording (Ctrl+R) from the menu.
Recording is initiated according to settings in the Record | Recording Options menu.
6.5 Stopping a Recording
A recording can be manually stopped from the toolbar, keyboard, or the menu.
To stop a recording:
1. Click on Stop
on the toolbar.
or
Select Record | Stop Recording (Ctrl+Shift+R) from the menu.
The recording is stopped. Any traffic remaining in the analyzer’s memory is uploaded to the PC
hosting the analyzer application.
Clicking the Stop button a second time cancels the upload of any remaining
traffic still located on the analyzer’s memory.
6.6 Restarting a Recording
A recording in progress can be restarted from the toolbar or from the Record menu. The
analyzer will stop capturing new data, the data captured until now will be discarded, a new
capture will be created and the analyzer will be started again.
To restart a recording:
1. Click on Restart
on the toolbar.
or
Select Record | Restart Recording from the menu.
The capture in progress is halted, traffic captured is discarded, and a new recording is initiated.