Manual
ADVANCE ADAPTERS INC. P/N: 50-0213
P.O. Box 247, 4320 Aerotech Center Way New Item: (08/94)
Paso Robles, CA 93447 PAGE 1 OF 3
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 7-14-14
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components
will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly
recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We
recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally
available at automotive dealerships and parts stores.
KIT CONSISTS OF:
No. Qty Part No. Description
1. 1 51-0224 ADAPTER CASTING 6.375" LONG
2. 1 52-0213A 16 SPLINE SPUD SHAFT (31T INTERNAL)
3. 1 Kit 715532 TRANSFER CASE LINKAGE BRKT. ASSY.
4. 1 716199 BEARING SLEEVE FOR 716301 BEARING
5. 1 716301 SEALED BEARING
6. 1 716462 SET COLLAR
7. 1 716507 GASKET
8. 8 720046 S.H.C.S. 10mm 1.5 THR x 40mm
9. 2 723735 3/8" FLAT WASHER
10. 2 723739 3/8"-16 x 7/8" H.H.C.S.
11. 5 724303 7/16" LOCKWASHERS
12. 8 724324 7/16" LOCKWASHERS, HIGH COLLAR
13. 3 724345 7/16"-14 x 5" HEX HEAD BOLT
14. 2 724349 7/16"-14 x 1-1/2" H.H.C.S.
15. 1 728701 NYLON NUT
16. 1 728702 7/8" FLATWASHER
NEW VENTURE MODEL 4500 5 SPEED
TO TOYOTA L/C 16 SPLINE (Short Design)
NOTE:
This adapter kit has an overall transmission assembled length of 18.750". This transmission kit must be used with a 4WD
GM transmission.
CAUTION:
There are two 3/8" holes located on the side of the adapter for the mechanical shifter linkage. If your vehicle
has a 3 speed vacuum type shifter, these holes are not going to be used. They will need to be plugged with the
hardware provided and small amount of silicone.