Owner's manual

ManualsBrandsAdvance Adapters ManualsCar50-0226

ADVANCE ADAPTERS INC. P/N: 50-0226

P.O. Box 247, 4320 Aerotech Center Way New Item: (09/97)

Paso Robles, CA 93447 PAGE 1 OF 3

Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 12-18-09

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components

will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly

recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We

recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally

available at automotive dealerships and parts stores.

KIT CONSISTS OF:

No. Qty Part No. Description

1. 1 51-0224 ADAPTER CASTING

2. 1 52-0226 16 SPLINE SPUD SHAFT (23T INTERNAL)

3. 1 Kit 715532 TRANSFER CASE LINKAGE BRKT. ASSY.

4. 1 716199 RETAINER

5. 1 716301 SEALED BEARING

6. 1 716507 GASKET

7. 8 720046 10mm-1.5 x 40mm LONG

8. 2 723735 3/8" FLAT WASHER

9. 2 723739 3/8"-16 x 7/8" H.H.C.S.

10. 5 724303 7/16" LOCKWASHERS

11. 8 724324 7/16" HIGH COLLAR LOCK WASHER

12. 3 724345 7/16" x 14 x 5" HEX HEAD BOLT

13. 2 724349 7-16" x 14 x 1-1/2" H.H.C.S.

14. 1 728701 NYLON NUT

15. 1 728702 7/8" FLATWASHER

16. 1 TLC001 LAND CRUISER INSTRUCTION MANUAL

17. 1 NV001 NV INSTRUCTION MANUAL

NOTE:

This adapter kit has an overall transmission assembled length of 18.750". This kit will work ONLY with Dodge NV4500

gas transmissions having 23 spline output.

CAUTION:

There are two 3/8" holes located on the side of the adapter for the mechanical shifter linkage. If your vehicle

has a 3 speed vacuum type shifter, these holes are not going to be used. They will need to be plugged with the

hardware provided and small amount of silicone.

DODGE NV4500 5 SPEED23 SPLINE OUTPUT

TO TOYOTA L/C 16 SPLINE

Summary of content (3 pages)

PAGE 1
ADVANCE ADAPTERS INC. P/N: 50-0226 P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 New Item: (09/97) PAGE 1 OF 3 Page Rev. Date: 12-18-09 DODGE NV4500 5 SPEED23 SPLINE OUTPUT TO TOYOTA L/C 16 SPLINE KIT CONSISTS OF: No. Qty Part No. Description 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17.
PAGE 2
ADVANCE ADAPTERS INC. P/N: 50-0226 P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 New Item: (09/97) PAGE 2 OF 3 Page Rev. Date: 06-06-01 DODGE NV4500 5 SPEED23 SPLINE OUTPUT TO TOYOTA L/C 16 SPLINE NOTE: 1. This adapter is designed for exclusive use of the Dodge 4WD 23 spline output version of the NV Model 4500 transmission. You must use this transmission due to the length and spline size of the output shaft.
PAGE 3
ADVANCE ADAPTERS INC. P/N: 50-0226 P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 New Item: (09/97) PAGE 3 OF 3 Page Rev. Date: 12-18-09 DODGE NV4500 5 SPEED23 SPLINE OUTPUT TO TOYOTA L/C 16 SPLINE 4 SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void any possible warranty or return privileges.