Owner manual

ManualsBrandsAdvance Adapters ManualsCar50-1401

KIT CONSISTS OF:

No. Qty Part No. Description

ADVANCE ADAPTERS INC. P/N: 50-1401

P.O. Box 247, 4320 Aerotech Center Way New Item: (05/97)

Paso Robles, CA 93447 PAGE 1 OF 3

Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 02-27-03

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will

void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend

that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that

a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at

automotive dealerships and parts stores.

OPTIONAL ITEMS:

Qty Part No. Description

1 716003 CROSSMEMBER

1 716302 SEALED BEARING

1 716001 (T86) LARGE HOLE OR

1 716002 (T90) SMALL HOLE

BRG. RETAINER

NOTE: Two TH400 bolt patterns have been

drilled into this housing; one is for a GM TH400

and the other is rotated for the AMC TH400.

1. 1 51-0600 ADAPTER CASTING (Ref: 711106)

2. 1 52-1301 SPUD SHAFT (23-Splines)(Ref: 711313-23)

3. 1 52-3200 OUTPUT SHAFT (Ref: 711332)

4. 1 716308 BEARING (#6209)

5. 1 716450 SNAP RING (GM #378-5205)

6. 1 716510 GASKET (GM #862-4709)

7. 1 716568 GASKET

8. 1 716707 SEAL (NAT. #472144)

9. 6 723701 HEX NUT

10. 11 723704 3/8" LOCKWASHER

11. 6 723711 3/8"-16 x 2" STUD BOLTS

12. 5 723723 3/8"-16 x 1-1/2" H.H.C.S. (T/C BOLTS)

13. 1 728701 NYLON LOCK NUT

14. 1 JP001 JEEP INSTRUCTION MANUAL

TURBO 400 TO JEEP & SCOUT VEHICLES

DANA 18/20 TRANSFER CASE WITH 23 SPLINES

Summary of content (3 pages)

PAGE 1
ADVANCE ADAPTERS INC. P/N: 50-1401 P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 New Item: (05/97) PAGE 1 OF 3 Page Rev. Date: 02-27-03 TURBO 400 TO JEEP & SCOUT VEHICLES DANA 18/20 TRANSFER CASE WITH 23 SPLINES KIT CONSISTS OF: OPTIONAL ITEMS: No. Qty Part No. Description Qty Part No. Description 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.
PAGE 2
ADVANCE ADAPTERS INC. P/N: 50-1401 P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 New Item: (05/97) PAGE 2 OF 3 Page Rev. Date: 05-01-00 TURBO 400 TO JEEP & SCOUT VEHICLES DANA 18/20 TRANSFER CASE WITH 23 SPLINES GM TURBO 400 3 SPEED AUTOMATIC The GM TH400 has a case length of 24-1/4", 13 bolts for holding the oil pan in position and is available in 3 different engine to transmission bolt patterns.
PAGE 3
ADVANCE ADAPTERS INC. P/N: 50-1401 P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 New Item: (05/97) PAGE 3 OF 3 Page Rev. Date: 05-17-00 TURBO 400 TO JEEP & SCOUT VEHICLES DANA 18/20 TRANSFER CASE WITH 23 SPLINES SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void any possible warranty or return privileges.