Instruction Manual

ManualsBrandsAdvance Adapters ManualsCar50-2700

ADVANCE ADAPTERS INC. P/N: 50-2700

P.O. Box 247, 4320 Aerotech Center Way Old Part No: 711027

Paso Robles, CA 93447 PAGE 1 OF 2

Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 10-25-04

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will

void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend

that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a

service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive

dealerships and parts stores.

KIT CONSISTS OF:

No. Qty Part No. Description

NEW PROCESS 435 & T18 4 SPEED TO

BRONCO DANA 20 1966-77

1. 1 51-1400 CASTING (Ref: 711114)

2. 1 716223 ALIGNMENT RETAINER

3. 1 716455 SNAP RING

4. 1 716512 GASKET

5. 1 716513 GASKET

6. 1 716713 SEAL (C/R #18676)

7. 1 716714 "O" RING SEAL

8. 2 723701 3/8-16 NUTS

9. 2 723704 3/8 LOCK WASHER

10 2 723711 3/8-16 X 2" STUD

11. 2 725004 HEX NUT 1/2"-13 NAT

12. 4 725016 S.H.C.S. 1/2"- 13 x 1-1/2"

13. 2 725040 1/2"-13 x 2.00 STUD

NOTE:

The T18 and NP435 2WD output shafts

may need the threaded portion of the

shaft cut off to prevent bottoming out

in the stock spud shaft.

Summary of content (2 pages)

PAGE 1
ADVANCE ADAPTERS INC. P/N: 50-2700 P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 Old Part No: 711027 PAGE 1 OF 2 Page Rev. Date: 10-25-04 NEW PROCESS 435 & T18 4 SPEED TO BRONCO DANA 20 1966-77 KIT CONSISTS OF: No. Qty Part No. Description 1. 2. 3. 4. 5. 6. 7. 8. 9. 10 11. 12. 13.
PAGE 2
ADVANCE ADAPTERS INC. P/N: 50-2700 P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 Old Part No: 711027 PAGE 2 OF 2 Page Rev. Date: 11-06-03 NEW PROCESS 435 & T18 4 SPEED TO BRONCO DANA 20 1966-77 FORD NEW PROCESS NP435 4 SPEED: The NP435 transmission can be identified by a case length of 10.875" and a case casting number of C95711, C96391, or C13894. The aluminum shift cover has a casting number of C11240, C97233 or C994569. The P.T.O.