Owner's manual

ADVANCE ADAPTERS INC. P/N: 50-2800
P.O. Box 247, 4320 Aerotech Center Way Old Part No: 711028
Paso Robles, CA 93447 PAGE 1 OF 2
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 12-14-07
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will
void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend
that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a
service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive
dealerships and parts stores.
KIT CONSISTS OF:
No. Qty Part No. Description
FORD T&C 10 BOLT TOP LOADER 4SP
TOYOTA L/C 3 SPEED TRANSFER CASE
1. 1 51-1500 ADAPTER PLATE (Ref: 711115)
2. 1 52-2800 MAIN SHAFT (Ref: 711328)
3. 1 716502 GASKET
4. 1 716507 GASKET
5. 5 724317 S.H.C.S. 7/16"-14 x 1-1/4" LG.
6. 3 720089 12mm x 1.25 x 130mm
7. 2 720063 12mm x 1.25 x 90mm
8. 1 728701 NYLON LOCK NUT
9. 1 728702 WASHER
NOTE:
IF YOUR NEW SHAFT VARIES FROM THE ORIGINAL SHAFT,
YOU MAY HAVE A FORD TOP LOADER OVERDRIVE TRANS-
MISSION ADAPTER PLATE.
This kit is designed for a top shifted
transmission. If used on a side
shifted transmission, shift linkage
must be fabricated.

Summary of content (2 pages)