Manual
KIT CONSISTS OF:
No. Qty Part No. Description
ADVANCE ADAPTERS INC. P/N: 50-3020A
P.O. Box 247, 4320 Aerotech Center Way New Item: (04-02)
Paso Robles, CA 93447 PAGE 1 OF 4
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 02-28-14
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will
void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend
that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a
service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive
dealerships and parts stores.
JEEP & SCOUT DANA 20 T/C TAILHOUSING
32 SPLINE OUTPUT WITHOUT YOKE
1. 1 300491 REAR YOKE END PLAY SHIM (3 sizes) (Installed by AA)
2. 1 300513 BEARING, REAR OUTPUT (YOKE SIDE) (Installed by AA)
3. 1 716303 BEARING, REAR OUTPUT (CASE SIDE) (Installed by AA)
4. 1 300625 SPEEDO RING GEAR (Installed by AA)
5. 1 300627 CIRCLIP, SPEEDO RING GEAR (Installed by AA)
6. 1 300104P SPEEDOMETER HOLE PLUG
7. 1 300629 SPEEDOMETER RETAINING CLIP
8. 1 300630 O-RING FOR SPEEDOMETER
9. 1 300922 BREATHER, BRASS ELBOW (Installed by AA)
10. 1 51-3020 CASTING (Installed by AA)
11. 1 52-3020 SHAFT (Installed by AA)
12. 1 301403 BOLT- 5/16"-18 x 3/4" H.F.C.S. SPEEDOMETER CLIP BOLT
13. 4 723730 S.H.C.S. 3/8"-16 x 1-1/4"
14. 1 723713 3/8"-16 x 1.25" STUD BOLT
15. 1 723701 3/8"-16 NUT
NOTE: This kit is 1.5" longer than stock.
THIS KIT SHOULD BE SOLD WITH A YOKE KITS THAT INCLUDES A SEAL, NUT, SAEL WASHER,
& YOKE. THIS KIT ALLOW ANY ADVANCEADAPTERS YOKE TO BE INSTALLED ON THE TAIL
SHAFT KIT.