User Manual

ManualsBrandsAdvance Adapters ManualsCar50-3100

KIT CONSISTS OF:

No. Qty Part No. Description

ADVANCE ADAPTERS INC. P/N: 50-3100

P.O. Box 247, 4320 Aerotech Center Way Old Part No: 711031

Paso Robles, CA 93447 PAGE 1 OF 3

Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 10-12-14

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will

void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend

that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a

service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive

dealerships and parts stores.

OPTIONAL ITEMS:

Qty Part No. Description

1. 1 51-1700 CASTING (Ref: 711117)

2. 1 52-1200 SHAFT (Ref: 711312)

3. 1 52-1300 SHAFT- SPUD GM 27TF X JP 6TM

4. 1 52-1401 GEAR-DRIVE, MODEL 18 29T X 6 SPL

20 degree press angle

5. 1 716062 NYLON BUSHING FOR T350

OUTPUT SHAFT

(CUSTOMER MUST INSTALL)

6. 1 716308 BEARING

7. 1 716450 SNAP RING

8. 1 716456 SNAP RING (T/A N5000-334)

9. 1 716511 "O"-RING

10. 1 716568 GASKET

11. 2 716700 SEAL

12. 4 723728 3/8"-16 X 2-1/4" S.H.C.S.

13. 1 724319 7/16"-20 X 3/8" SET SCREW

14. 1 728701 7/8" NYLOCK NUT

1 716003 CROSSMEMBER MT

1 716302 SEALED BEARING

1 716001 or

716002 T86/T90 BRG. RET

1 716010 MODULATOR

GM TH350 AUTOMATIC TO

JEEP & SCOUT DANA 18/20 1945-79

*20 Degree pressure angle gear:

Model 18 transfer cases with 2.46:1,

w/ T14 transmission, 1 ¼” intermediate shaft

CJ with Buck V6 (68-71)

Drive gear# 18-8-50 (947382) ---29 tooth x 10 spline

Intermediate Gear # 18-5-9 (809293) ---39 tooth x 18 tooth

**Requires AA part # 52-1401

18-8-23 (809297) ----29 tooth x 6 spline (SUPPLIED IN KIT)

17 Degree pressure angle gear:

Model 18 transfer cases with 2.03:1,

w/ T14 transmission, 1 ¼” intermediate shaft

Jeepster/CJ (67-74) models 18/20

Drive gear# 18-8-49 (947339) ---26thx10sp.

Intermediate Gear# 18-5-16(946786) 34thx20th

(Special order gear)

Summary of content (3 pages)

PAGE 1
ADVANCE ADAPTERS INC. P/N: 50-3100 P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 Old Part No: 711031 PAGE 1 OF 3 Page Rev. Date: 10-12-14 GM TH350 AUTOMATIC TO JEEP & SCOUT DANA 18/20 1945-79 KIT CONSISTS OF: OPTIONAL ITEMS: No. Qty Part No. Description 1. 2. 3. 4. 1 1 1 1 51-1700 52-1200 52-1300 52-1401 5. 1 716062 6. 7. 8. 9. 10. 11. 12. 13. 14.
PAGE 2
ADVANCE ADAPTERS INC. P/N: 50-3100 P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 Old Part No: 711031 PAGE 2 OF 3 Page Rev. Date: 10-12-14 GM TH350 AUTOMATIC TO JEEP & SCOUT DANA 18/20 1945-79 GM TH350 3 SPEED The General Motors TH350 has a case length of 21-1/2", 13 bolts for holding the oil pan in position and is available in two different engine to transmission bolt patterns.
PAGE 3
ADVANCE ADAPTERS INC. P/N: 50-3100 P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 Old Part No: 711031 PAGE 3 OF 3 Page Rev. Date: 10-12-14 GM TH350 AUTOMATIC TO JEEP & SCOUT DANA 18/20 1945-79 SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void any possible warranty or return privileges.