Instruction Manual
KIT CONSISTS OF:
No. Qty Part No. Description
ADVANCE ADAPTERS INC. P/N: 50-3102
P.O. Box 247, 4320 Aerotech Center Way New Item: (09/93)
Paso Robles, CA 93447 PAGE 1 OF 3
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 09-11-97
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will
void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend
that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a
service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive
dealerships and parts stores.
OPTIONAL ITEMS:
Qty Part No. Description
1. 1 51-1700 CASTING (Ref: 711117)
2. 1 52-1200 SHAFT (Ref: 711312)
3. 1 52-1301 SPUD SHAFT (Ref: 711313-23)
4. 1 716062 NYLON BUSHING FOR T350
OUTPUT SHAFT
(CUSTOMER MUST INSTALL)
5. 1 716308 BEARING
6. 1 716450 SNAP RING
7. 1 716456 SNAP RING (T/A N5000-334)
8. 1 716511 "O"-RING
9. 1 716568 GASKET
10. 2 716700 SEAL
11. 4 723728 3/8"-16 X 2-1/4" S.H.C.S.
12. 1 724319 7/16"-20 X 3/8" SET SCREW
13. 1 728701 7/8" NYLOCK NUT
14. 1 JP001 JEEP INSTRUCTION MANUAL
1 716003 CROSSMEMBER MT
1 716302 SEALED BEARING
1 716001 or
716002 T86/T90 BRG. RET
1 716010 MODULATOR
GM TH350 AUTOMATIC TO
SCOUT DANA 18/20 OR DANA 300 1945-79