Manual

ADVANCE ADAPTERS INC. P/N: 50-5905D
P.O. Box 247, 4320 Aerotech Center Way Old Part No: MC03
Paso Robles, CA 93447 PAGE 9 OF 9
Telephone: [phone] Fax: [phone] Page Rev. Date: 06-19-06
TX2 CRAWLER ADAPTER
TOYOTA 4WD TRUCKS 21T INPUT
VEHICLE APPLICATION
79 to 83
Carburated
85 to 88 EFI
84 to 88
Carburated
86 to 87 EFI
Turbo
89 to 95 EFI
TRANFER CASE SHIFTER BASE
LOCATION
Shifter on transfer case
4 Bolt Cast Iron Base
3-1/8" x 4-3/8"
Shifter on transmission tailhousing
4 Bolt Aluminum Base
3-1/4" x 4"
Shifter on transmission tailhousing
6 Bolt Aluminum Base
Transfer case & transmission s shift
handles are integral. Alum. base 4"x8"
DISTANCE
6 -1/2"
11"
10"
This chart covers the 4 cylinder Gear-Driven Transfer Case (7 bolt rear cover)
P/N 50-5905 21 spline (4 cyl.)
P/N 50-5906 23 spline
(4 cyl. Turbo or V6)
Footnote #1 - The rear T/case must be a top shifting style (1979-83 Carbureted or 1985-88 EFI).
Footnote #2 - Reduction gear box can retain the original T/C shift rod location to match to the existing
transmission, or the reduction box can can be changed out to the 79-83 carbureted or
85-88 EFI box (T/C shift lever on reduction box).
Footnote #3 - Shift rods, forks & driveshaft flanges are interchangeable between all years shown.