Manual

ManualsBrandsAdvance Adapters ManualsCar50-8500

ADVANCE ADAPTERS INC. P/N: 50-8500

P.O. Box 247, 4320 Aerotech Center Way Old Part No: 711085

Paso Robles, CA 93447 PAGE 1 OF 2

Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 12-19-96

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will

void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend

that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a

service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive

dealerships and parts stores.

KIT CONSISTS OF:

No. Qty Part No. Description

1. 1 51-8500 ADAPTER (Ref: 711185)

2. 1 52-8700 SHAFT (13.250" O.A.L.) WITH UNDER CUT (Ref: 711387)

3. 1 716062 NYLON BUSHING FOR T350 OUTPUT SHAFT (CUSTOMER MUST INSTALL)

4. 2 716511 "O"-RING

5. 4 723704 3/8" LOCK WASHER

6. 4 723743 3/8"-16 x 4-1/2" H.H.B.

7. 1 GM001 GM INSTRUCTION MANUAL

GM TH350 AUTOMATIC TO

GM NEW PROCESS 207 S10-S15 4WD

Summary of content (2 pages)

PAGE 1
ADVANCE ADAPTERS INC. P/N: 50-8500 P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 Old Part No: 711085 PAGE 1 OF 2 Page Rev. Date: 12-19-96 GM TH350 AUTOMATIC TO GM NEW PROCESS 207 S10-S15 4WD KIT CONSISTS OF: No. Qty Part No. Description 1. 2. 3. 4. 5. 6. 7. ADAPTER (Ref: 711185) SHAFT (13.250" O.A.L.) WITH UNDER CUT (Ref: 711387) NYLON BUSHING FOR T350 OUTPUT SHAFT (CUSTOMER MUST INSTALL) "O"-RING 3/8" LOCK WASHER 3/8"-16 x 4-1/2" H.H.B.
PAGE 2
ADVANCE ADAPTERS INC. P/N: 50-8500 P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 Old Part No: 711085 PAGE 2 OF 2 Page Rev. Date: 08-03-04 GM TH350 AUTOMATIC TO GM NEW PROCESS 207 S10-S15 4WD GM TH350 3 SPEED AUTOMATIC: The General Motors TH350 has a case length of 21-1/2", 13 bolts for holding the oil pan in position and is available in two different engine to transmission bolt patterns.