Manual

ManualsBrandsAdvance Adapters ManualsCar50-9702

KIT CONSISTS OF:

No. Qty Part No. Description

ADVANCE ADAPTERS INC. P/N: 50-9702

P.O. Box 247, 4320 Aerotech Center Way New Item: (3/93)

Paso Robles, CA 93447 PAGE 1 OF 3

Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 05-29-01

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will

void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend

that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a

service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive

dealerships and parts stores.

1. 1 51-9702 CASTING 5-1/4" LG. (Jeep-Dana 300)

2. 1 52-9700 SPUD SHAFT 23 SPLINE

3. 1 716453 SNAP RING

4. 1 716454 SET COLLAR

5. 1 716508 GASKET

6. 1 716517 GASKET (Dana 300)

7. 9 723701 3/8"-16 NUTS

8. 14 723704 3/8" LOCKWASHER PLT.

9. 1 723710 3/8"-16 X 2.5" STUD.

10. 8 723711 3/8"-16 X 2" STUD.

11. 5 723722 3/8"-16 X 1.25" H.H.C.S.

12. 1 JP001 JEEP INSTRUCTION MANUAL

GM TRUCK 4SP MODEL SM420 TO

JEEP DANA 300 TRANSFER CASE

INSTALLATION NOTE:

This adapter kit replaces Kit No. 50-9700 that utilized a two piece adapter housing that had an overall length

of 5-7/8". This new adapter kit was re-designed in March 1993, to use a 5-1/4" one-piece adapter housing.

Note: If using our 716021 crossmember mount with this adapter, you will need to grind some

clearance on the crossmember block for installation.

Summary of content (3 pages)

PAGE 1
ADVANCE ADAPTERS INC. P/N: 50-9702 P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 New Item: (3/93) PAGE 1 OF 3 Page Rev. Date: 05-29-01 GM TRUCK 4SP MODEL SM420 TO JEEP DANA 300 TRANSFER CASE KIT CONSISTS OF: No. Qty Part No. Description 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 1 1 1 1 1 1 9 14 1 8 5 1 51-9702 52-9700 716453 716454 716508 716517 723701 723704 723710 723711 723722 JP001 CASTING 5-1/4" LG.
PAGE 2
ADVANCE ADAPTERS INC. P/N: 50-9702 P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 New Item: (3/93) PAGE 2 OF 3 Page Rev. Date: 03-19-93 GM TRUCK 4SP MODEL SM420 TO JEEP DANA 300 TRANSFER CASE GM & CHEVY SM420 TRUCK 4 SPEED 1948-67: This transmission can be identified by a cast iron case length of 10-1/2". The casting numbers on the side of the case should be GM #3761930 or GM #3813389.
PAGE 3
ADVANCE ADAPTERS INC. P/N: 50-9702 P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 New Item: (3/93) PAGE 3 OF 3 Page Rev. Date: 12-11-00 GM TRUCK 4SP MODEL SM420 TO JEEP DANA 300 TRANSFER CASE 5 1 -9 7 0 2 DVANCE DAP T E R S SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void any possible warranty or return privileges.