User Manual

ManualsBrandsAdvance Adapters ManualsCar712530

ADVANCE ADAPTERS INC. P/N: 712530

P.O. Box 247, 4320 Aerotech Center Way

Paso Robles, CA 93447 PAGE 1 OF 3

Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 05-08-13

KIT CONSISTS OF:

No. Qty Part No. Description

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void

any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend that

you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a service

manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive dealerships

and parts stores.

1. 1 711530 ADAPTER PLATE

2. 1 716146 BEARING RETAINER

3. 1 716147 BEARING COLLAR (Assembled w/ 716314 by AA)

4. 1 716170 PILOT BUSHING (.590" I.D.)

5. 1 716176 CLUTCH RELEASE ARM (Needs Modification)

6. 1 716314 SPECIAL RELEASE BEARING (Assembled onto 716147 by AA)

7. 4 723113 S.H.C.S. 5/16"-18 x 3/4" LONG

8. 4 725008 H.H.C.S. 1/2"-13 x 1-1/2" LONG

SCOUT T18-T19-T98 4 SPEED TRANSMISSION

TO CHEVY & BUICK ENGINES

Summary of content (3 pages)

PAGE 1
ADVANCE ADAPTERS INC. P/N: 712530 P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 PAGE 1 OF 3 Page Rev. Date: 05-08-13 SCOUT T18-T19-T98 4 SPEED TRANSMISSION TO CHEVY & BUICK ENGINES KIT CONSISTS OF: No. Qty Part No. Description 1. 2. 3. 4. 5. 6. 7. 8. ADAPTER PLATE BEARING RETAINER BEARING COLLAR (Assembled w/ 716314 by AA) PILOT BUSHING (.590" I.D.
PAGE 2
ADVANCE ADAPTERS INC. P/N: 712530 P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 PAGE 2 OF 3 Page Rev. Date: 03-14-01 SCOUT T18-T19-T98 4 SPEED TRANSMISSION TO CHEVY & BUICK ENGINES INSTALLATION INSTRUCTIONS: This kit is for adapting all of the Scout 4 speed transmissions that are equipped with the long input shaft. This kit is not compatible with the small 1" spline input shafts.
PAGE 3
ADVANCE ADAPTERS INC. P/N: 712530 P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 PAGE 3 OF 3 Page Rev. Date: 01-11-07 SCOUT T18-T19-T98 4 SPEED TRANSMISSION TO CHEVY & BUICK ENGINES SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void any possible warranty or return privileges.