Owner's manual

ManualsBrandsAdvance Adapters ManualsCar715596

ADVANCE ADAPTERS INC. P/N: 715596

P.O. Box 247, 4320 Aerotech Center Way New Item: (11/10)

Paso Robles, CA 93447 PAGE 1 of 7

Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 07-26-11

SPECIAL NOTE: e components packaged in this kit have been assembled and machined for specic type of conversions. Modications to any of the

components will void any possible warranty or return privileges. If you do not fully understand modications or changes that will be required to complete your

conversion, we strongly recommend that you contact our sales department for more information. is instruction sheet is only to be used for the assembly of

Advance Adapter components. We recommend that a service manual pertaining to your vehicle be obtained for specic torque values, wiring diagrams and other

related equipment. ese manuals are normally available at automotive dealerships and parts stores.

KIT CONSISTS OF:

No. Qty Part No. Description

JK CABLE SHIFT LINKAGE UPGRADE KIT

1. 22 303311 HEAT SHIELD-FIREPROOF SLEEVE 1/2"

2. 2 303313 HEIM JOINT - FEMALE 1/4"-28

3. 2 340615 BOLT - 1/4"-20 X 5/8" B.H.C.S

4. 1 42R725 SHIFTER CABLE - 2" TRAVEL

5. 2 42R735 BOLT 1/4"-20 X 1" H.H.C.S. GRD 8

6. 1 42R740 BOLT 8mm X 1.25 X 14mm H.H.C.S.

7. 1 715596A PIVOT ASSEMBLY

8. 1 715596A1 PIVOT BLOCK

9. 1 715596B BRACKET-CABLE MOUNT

10. 1 715596C LEVER - TRANSFER CASE

11. 1 715596E SPACER - TRANSFER CASE LEVER

12. 5 722514 NYLON LOCKNUT 1/4"-20

13. 1 722523 1/4" USS FLAT WASHER PLTD.

14. 1 722530 1/4" X 20" X 3/4" S.H.C.S.

15. 2 722532 1/4"-20 X 3/4" H.H.C.S. GRD 5

16. 1 722543 1/4" X 20" X 1-1/2" S.H.C.S.

17. 2 726207 5/8" FLAT WASHER SAE OD

18. 1 29-2004 YOKE NUT

Notes:

The stock Jeep linkage uses plastic heim joints and a light duty shifter cable. The shifting of this transfer case and

stock linkage puts wear and tear on these shifter components and eventually will wear them out. Our new cable

upgrade keeps all the stock interior look and provides a positive shifting assembly that will provide a great addition

to your Jeep JK.

This kit replaces the stock Jeep cable assembly with a heavy duty push/pull cable equipped with quality steel heim

joints providing you a reliable linkage assembly.

Assembly video of this product found at ( http://www.youtube.com/watch?v=5OrMzFQ2ssg ).

Summary of content (7 pages)

PAGE 1
ADVANCE ADAPTERS INC. P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 P/N: 715596 New Item: (11/10) PAGE 1 of 7 Page Rev. Date: 07-26-11 JK CABLE SHIFT LINKAGE UPGRADE KIT KIT CONSISTS OF: No. Qty Part No. Description 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. HEAT SHIELD-FIREPROOF SLEEVE 1/2" HEIM JOINT - FEMALE 1/4"-28 BOLT - 1/4"-20 X 5/8" B.H.C.S SHIFTER CABLE - 2" TRAVEL BOLT 1/4"-20 X 1" H.H.C.S.
PAGE 2
ADVANCE ADAPTERS INC. P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 P/N: 715596 New Item: (11/10) PAGE 2 of 7 Page Rev. Date: 09-14-12 JKCABLE SHIFT LINKAGE UPGRADE KIT The installation will require the disassembly of the console for 2007 to 2010 JK's. There are 4 bolts that hold the console in place; two of the bolts require the seats to be adjusted forward. 2011 & Up console removal: Pull the shifter knob straight up and off.
PAGE 3
ADVANCE ADAPTERS INC. P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 P/N: 715596 New Item: (11/10) PAGE 3 of 7 Page Rev. Date: 07-18-14 JKCABLE SHIFT LINKAGE UPGRADE KIT Once the console is removed, you can unbolt the transfer case shifter from the floorboard and disconnect the stock cable from the shifter assembly. The stock cable extends forward and then into a access hole that goes along side the drivetrain.
PAGE 4
ADVANCE ADAPTERS INC. P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 P/N: 715596 New Item: (11/10) PAGE 4 of 7 Page Rev. Date: 09-14-12 JKCABLE SHIFT LINKAGE UPGRADE KIT The shifter kits comes with a new shifter lever for the transfer case. The lever must be installed to achieve the proper throw on the linkage.
PAGE 5
ADVANCE ADAPTERS INC. P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 P/N: 715596 New Item: (11/10) PAGE 5 of 7 Page Rev. Date: 10-11-10 JKCABLE SHIFT LINKAGE UPGRADE KIT Shifter Modifications: The shifter assembly needs to be disassembled to install the new stronger shifter components. The plastic shifter cover is removed by slipping a straight screw driver under its edge and lifting gently.
PAGE 6
ADVANCE ADAPTERS INC. P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 P/N: 715596 New Item: (11/10) PAGE 6 of 7 Page Rev. Date: 10-11-10 JKCABLE SHIFT LINKAGE UPGRADE KIT Slip the aluminum housing on to the JK handle and reinstall the pin that was just removed. Be sure that the upper handle leans back towards the 1/2" hole in the aluminum housing.
PAGE 7
ADVANCE ADAPTERS INC. P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 P/N: 715596 New Item: (11/10) PAGE 7 of 7 Page Rev. Date: 10-11-10 JKCABLE SHIFT LINKAGE UPGRADE KIT Loosely attach the cable to the shifter housing. Bolt the housing to the floor with the stock nuts. Install the new heim joint to the cable and secure it with the jam nut. Adjust the linkage as shown in the drawing.