Owner's manual

ADVANCE ADAPTERS INC. P/N: 715596
P.O. Box 247, 4320 Aerotech Center Way New Item: (11/10)
Paso Robles, CA 93447 PAGE 2 of 7
Telephone: [phone] Fax: [phone] Page Rev. Date: 09-14-12
SPECIAL NOTE: e components packaged in this kit have been assembled and machined for specic type of conversions. Modications to any of the
components will void any possible warranty or return privileges. If you do not fully understand modications or changes that will be required to complete your
conversion, we strongly recommend that you contact our sales department for more information. is instruction sheet is only to be used for the assembly of
Advance Adapter components. We recommend that a service manual pertaining to your vehicle be obtained for specic torque values, wiring diagrams and other
related equipment. ese manuals are normally available at automotive dealerships and parts stores.
JKCABLE SHIFT LINKAGE UPGRADE KIT
The installation will require the disassembly of the console for 2007 to 2010 JK's. There are 4 bolts that hold the
console in place; two of the bolts require the seats to be adjusted forward.
2011 & Up console removal: Pull the shifter knob straight up and off. The console is snap clipped into the lower con-
sole housing and the top portion just needs to be removed for the shifter installation
The stock transfer case shift knob must also be removed to remove the console. This knob is removed by pulling
upward on the knob (it is a tight t).