Owner's manual

ADVANCE ADAPTERS INC. P/N: 715596
P.O. Box 247, 4320 Aerotech Center Way New Item: (11/10)
Paso Robles, CA 93447 PAGE 3 of 7
Telephone: [phone] Fax: [phone] Page Rev. Date: 07-18-14
SPECIAL NOTE: e components packaged in this kit have been assembled and machined for specic type of conversions. Modications to any of the
components will void any possible warranty or return privileges. If you do not fully understand modications or changes that will be required to complete your
conversion, we strongly recommend that you contact our sales department for more information. is instruction sheet is only to be used for the assembly of
Advance Adapter components. We recommend that a service manual pertaining to your vehicle be obtained for specic torque values, wiring diagrams and other
related equipment. ese manuals are normally available at automotive dealerships and parts stores.
JKCABLE SHIFT LINKAGE UPGRADE KIT
Once the console is removed, you can unbolt the transfer case shifter from the oorboard and disconnect the stock
cable from the shifter assembly. The stock cable extends forward and then into a access hole that goes along side
the drivetrain.
Once the cable is along side
the transmission, it gets routed
back to a bracket that supports
the cable, and then the cable
connects to the transfer case
shifter lever. The upgrade kit
will require that the cable is
removed. The stock cable sup-
port bracket is re-used.
New cable routed along the transmission JK's 2007-11.