Owner's manual

ADVANCE ADAPTERS INC. P/N: 715596
P.O. Box 247, 4320 Aerotech Center Way New Item: (11/10)
Paso Robles, CA 93447 PAGE 5 of 7
Telephone: [phone] Fax: [phone] Page Rev. Date: 10-11-10
SPECIAL NOTE: e components packaged in this kit have been assembled and machined for specic type of conversions. Modications to any of the
components will void any possible warranty or return privileges. If you do not fully understand modications or changes that will be required to complete your
conversion, we strongly recommend that you contact our sales department for more information. is instruction sheet is only to be used for the assembly of
Advance Adapter components. We recommend that a service manual pertaining to your vehicle be obtained for specic torque values, wiring diagrams and other
related equipment. ese manuals are normally available at automotive dealerships and parts stores.
JKCABLE SHIFT LINKAGE UPGRADE KIT
Shifter Modications: The shifter assembly needs to be disassembled to install the new stronger shifter com-
ponents. The plastic shifter cover is removed by slipping a straight screw driver under its edge and lifting gently.
The shift handle pivot pin can be removed by tapping the pin several times with a small hammer or mallet.
After the pivot pin is removed, you should be able to
remove the handle assembly. The handle has a pivot
pin that also must be pressed out. Be careful not to
loose the spring and bushing when pulling the plastic
assembly from the handle. We found that a 7/16"
-1/4" drive socket works great to press the handle pin
from the handle.