Owner manual

ManualsBrandsAdvance Adapters ManualsCar715630

ADVANCE ADAPTERS INC. P/N: 715630

P.O. Box 247, 4320 Aerotech Center Way

Paso Robles, CA 93447 PAGE 1 OF 2

Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 07-18-02

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components

will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly

recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components.

We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are

normally available at automotive dealerships and parts stores.

KIT CONSISTS OF:

No. Qty Part No. Description

1. 3 715649 BUTTONS

2. 6 715650 NYLON BUSHINGS

3. 3 715651 CLIPS

4. 1 715653 LEVER

5. 1 715661 ROD

6. 1 715662 ROD

7. 1 715663 ROD

8. 1 715670 LEVER

9. 1 715678 LEVER

10. 3 303115 E-CLIP RETAINER V

PART NO.

71564

PART NO.

715644

BAGGED HARDWARE

PART NO. 715646

PART NO.

715647

PART NO. 715662

PART NO. 715661

P/N 715678

(1st & 2nd Gear)

PART NO. 715663

P.N. 715670

(REVERSE)

SHIFTER LINKAGE ROD & LEVER KIT

FOR EARLY BRONCO T&C TRANSMISSION

TYPICAL HURST SHIFTER

PART NO. 715600

Summary of content (2 pages)

PAGE 1
ADVANCE ADAPTERS INC. P/N: 715630 P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 PAGE 1 OF 2 Page Rev. Date: 07-18-02 SHIFTER LINKAGE ROD & LEVER KIT FOR EARLY BRONCO T&C TRANSMISSION KIT CONSISTS OF: No. Qty Part No. Description 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. BUTTONS NYLON BUSHINGS CLIPS LEVER ROD ROD ROD LEVER LEVER E-CLIP RETAINER V 3 6 3 1 1 1 1 1 1 3 715649 715650 715651 715653 715661 715662 715663 715670 715678 303115 PART NO.
PAGE 2
ADVANCE ADAPTERS INC. P/N: 715630 P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 PAGE 2 OF 2 Page Rev. Date: 07-18-02 SHIFTER LINKAGE ROD & LEVER KIT FOR EARLY BRONCO T&C TRANSMISSION INSTALLATION INSTRUCTIONS: 1. Align levers with shifter frame and insert neutral *alignment rod through notches in frame and holes in levers. (*Use small bolt or pin to align). 2. Rotate transmission arms backward and forward.