Owner manual

ManualsBrandsAdvance Adapters ManualsCar7160060

ADVANCE ADAPTERS INC. P/N: 716006

P.O. Box 247, 4320 Aerotech Center Way

Paso Robles, CA 93447 PAGE 1 OF 2

Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 10-28-96

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void

any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend that

you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a service

manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive dealerships

and parts stores.

KIT CONSISTS OF:

No. Qty Part No. Description

1. 1 716026 SHAFT

2. 1 716027 BUSHING

3. 2 716304 BEARING CUPS

4. 2 716305 BEARING CONES

5. 1 716709 "O"-RING

6. 1 716710 "O"-RING

7. 1 720005 PIN

8. 1 725605 WASHER

9. 1 726201 NUT

.485 -.005

+.0000

-.0005

1.980 DIA

(Both ends)

1.250" or 1.125"

SHAFT

"O"-RING

TRANSFER CASE

BEARING

CUP

GEAR

CUP

BEARING

NUT

WASHER

BUSHING

"O"-RING

LUBRICATE "O"-RING TO

PREVENT DAMAGE

1-1/8" JEEP DANA 18/20 TRANSFER CASE

INTERMEDIATE GEAR KIT

Summary of content (2 pages)

PAGE 1
ADVANCE ADAPTERS INC. P/N: 716006 P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 PAGE 1 OF 2 Page Rev. Date: 10-28-96 1-1/8" JEEP DANA 18/20 TRANSFER CASE INTERMEDIATE GEAR KIT KIT CONSISTS OF: No. Qty Part No. Description 1. 2. 3. 4. 5. 6. 7. 8. 9. SHAFT BUSHING BEARING CUPS BEARING CONES "O"-RING "O"-RING PIN WASHER NUT 1 1 2 2 1 1 1 1 1 716026 716027 716304 716305 716709 716710 720005 725605 726201 .485 +-.005 1.980 DIA +.
PAGE 2
ADVANCE ADAPTERS INC. P/N: 716006 P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 PAGE 2 OF 2 Page Rev. Date: 03-10-08 1-1/8" JEEP DANA 18/20 TRANSFER CASE INTERMEDIATE GEAR KIT INSTALLATION INSTRUCTIONS: Counter bore each side of gear to 1.9800 - 1.9795" diameter to a depth of .480/.490", and make sure stock bore runs concentric before boring each side.