User Manual

ManualsBrandsAdvance Adapters ManualsCar716639

ADVANCE ADAPTERS INC. P/N: 716639

P.O. Box 247, 4320 Aerotech Center Way

Paso Robles, CA 93447 PAGE 1 OF 5

Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 06-01-07

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void

any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend that

you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a service

manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive dealerships

and parts stores.

KIT CONSISTS OF:

No. Qty Part No. Description

1. 1 715650 BUSHING

2. 2 716140 CLEVIS

3. 1 716630 UPPER TUBE

4. 1 716631 LEVER

5. 1 716632 LOWER SHAFT

6. 1 716633 UPPER SHAFT

7. 1 716634 BRACKET

8. 1 716635 SPHERICAL CONNECTOR

9. 1 716636 SUPPORT BRACKET

10. 1 716637 BRACKET ASSEMBLY

11. 2 716641 CONNECTOR

12. 1 716644 SPROCKET

13. 2 716645 MASTER LINK

14. 1 716647 ROD END

15. 1 716648 HOUSING

16. 1 716649 CHAIN

17. 2 720005 COTTER PIN

18. 4 723103 5/16" LOCK WASHERS

19. 1 723104 5/16"-18 x 3/4" H.H.C.S.

20. 3 723105 5/16"-18 x 1" H.H.C.S.

21. 3 723122 5/16" FLAT WASHERS

22. 3 723131 5/16"-24 HEX NUT

23. 1 723133 5/16"-24 x 3" ALL THREAD - GRD. 5

24. 2 723701 3/8"-16 HEX NUT

25. 3 723704 3/8" LOCK WASHERS

26. 2 723719 HEX JAM NUT 3/8"-24 PLATED

27. 1 723720 3/8"-16 x 3/4" LG. H.H.C.S.

28. 2 723722 3/8"-16 x 1-1/4" H.H.C.S.

29. 6 723735 3/8" FLAT WASHERS

30. 1 723756 3/8"-24 x 3.25" LONG - ALL THREAD

31. 2 725002 1/2" LOCK WASHER

32. 4 725003 1/2" FLAT WASHER

33. 2 725004 1/2"-13 HEX NUT

34. 3 725008 1/2"-13 x 1-1/2" H.H.C.S.

35. 2 761309 ZERK FITTING

JEEP CHAIN CONTROL CLUTCH LINKAGE

KIT FOR VEHICLES 1972-86 with V8's

Note: This kit may not work

on a reverse shackle kit

Summary of content (5 pages)

PAGE 1
ADVANCE ADAPTERS INC. P/N: 716639 P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 PAGE 1 OF 5 Page Rev. Date: 06-01-07 JEEP CHAIN CONTROL CLUTCH LINKAGE KIT FOR VEHICLES 1972-86 with V8's KIT CONSISTS OF: No. Qty Part No. Description 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35.
PAGE 2
ADVANCE ADAPTERS INC. P/N: 716639 P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 PAGE 2 OF 5 Page Rev. Date: 07-24-01 JEEP CHAIN CONTROL CLUTCH LINKAGE KIT FOR VEHICLES 1972-86 with V8's INSTALLATION INSTRUCTIONS: Part No. 716639, fits Jeeps from 1972 through 1985 with mechanical clutch controls. This clutch control conversion kit is for vehicles with V8 engines.
PAGE 3
ADVANCE ADAPTERS INC. P/N: 716639 P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 PAGE 3 OF 5 Page Rev. Date: 07-24-01 JEEP CHAIN CONTROL CLUTCH LINKAGE KIT FOR VEHICLES 1972-86 with V8's HOUSING PART NO. 716648 CLUTCH FORK **Drill out for bolt clearance (Item 26) FRAME BRACKET PART NO. 716634 PART NO. 725008 SPERICAL CONNECTOR PART NO. 716635 STOCK ROD TUBE PART NO. 716630 CHAIN PART NO. 716649 BOLT PART NO. 723105 SPROCKET PART NO.
PAGE 4
ADVANCE ADAPTERS INC. P/N: 716639 P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 PAGE 4 OF 5 Page Rev.
PAGE 5
ADVANCE ADAPTERS INC. P/N: 716639 P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 PAGE 5 OF 5 Page Rev. Date: 07-24-01 JEEP CHAIN CONTROL CLUTCH LINKAGE KIT FOR VEHICLES 1972-86 with V8's SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void any possible warranty or return privileges.