Instruction Manual

ManualsBrandsAdvance Adapters ManualsCar716640

ADVANCE ADAPTERS INC. P/N: 716640

P.O. Box 247, 4320 Aerotech Center Way

Paso Robles, CA 93447 PAGE 1 OF 4

Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 05-01-00

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void

any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend that

you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a service

manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive dealerships

and parts stores.

KIT CONSISTS OF:

No. Qty Part No. Description

1. 1 716635 SPHERICAL BALL (Used with GM cast iron release lever only)

2. 2 716641 CONNECTOR

3. 1 716642 CABLE

4. 1 716644 SPROCKET

5. 2 716645 MASTER LINK

6. 1 716646 BRACKET

7. 1 716647 ROD END

8. 1 716648 HOUSING

9. 1 716649 CHAIN

10. 2 723103 5/16" LOCK WASHER

11. 2 723105 5/16"-18 X 1" H.H.C.S.

12. 2 723131 5/16"-24 NUT

13. 1 723134 5/16"-18 X 1-1/4" H.H.C.S.

14. 1 723141 5/16"-18 NYLON LOCK NUT

15. 2 723701 3/8"-6 NUT

16. 2 723704 3/8" LOCK WASHER

17. 2 723722 3/8"-16 X 1-1/4" H.H.C.S.

18. 2 723735 3/8" FLAT WASHER

19. 1 725008 1/2"-13 X 1-1/2" H.H.C.S.

20. 1 JP001 JEEP INSTRUCTION MANUAL

JEEP CHAIN CONTROL CLUTCH LINKAGE

KIT FOR VEHICLES 1946-70

USING A JEEP ARM USING A GM ARM

Summary of content (4 pages)

PAGE 1
ADVANCE ADAPTERS INC. P/N: 716640 P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 PAGE 1 OF 4 Page Rev. Date: 05-01-00 JEEP CHAIN CONTROL CLUTCH LINKAGE KIT FOR VEHICLES 1946-70 KIT CONSISTS OF: No. Qty Part No. Description 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20.
PAGE 2
ADVANCE ADAPTERS INC. P/N: 716640 P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 PAGE 2 OF 4 Page Rev. Date: 05-17-01 JEEP CHAIN CONTROL CLUTCH LINKAGE KIT FOR VEHICLES 1946-70 INSTALLATION INSTRUCTIONS: 1. Remove the cotter pins on the clutch release rod. 2. Remove the pedal release rod. 3. Remove the clutch linkage torque tube. This requires the removal of the (2) bolts from the outside of the frame rails.
PAGE 3
ADVANCE ADAPTERS INC. P/N: 716640 P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 PAGE 3 OF 4 Page Rev. Date: 01-23-01 JEEP CHAIN CONTROL CLUTCH LINKAGE KIT FOR VEHICLES 1946-70 HOUSING PART NO. 716648 CONNECTOR PART NO. 716641 CABLE PART NO. 716642 CHAIN PART NO. 716649 5/16"-24 NUT PART NO. 723131 SPROCKET PART NO. 716644 ROD END PART NO. 716647 5/16"-18 NYLON LOCK NUT PART NO. 723141 LOCK WASHER PART NO. 723103 MASTER LINK PART NO.
PAGE 4
ADVANCE ADAPTERS INC. P/N: 716640 P.O. Box 247, 4320 Aerotech Center Way Paso Robles, CA 93447 Telephone: (800) 350-2223 Fax: (805) 238-4201 PAGE 4 OF 4 Page Rev. Date: 05-17-01 JEEP CHAIN CONTROL CLUTCH LINKAGE KIT FOR VEHICLES 1946-70 INSTALLATION PHOTOS SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void any possible warranty or return privileges.