User's Manual
98
Face Recognition Scanner user's manual Face Recognition Scanner user's manual
9. Install Instruction
Box 86 for Wall-Mounted Installation
1. Install stickers on the wall, and make holes in the wall according to the height and
position of the stickers to install Box 86.
2. Align the outlet of the hanging board with the center of the Box 86
,
punch four
mounting holes on the wall according to the punching size diagram
,
and insert four
wall plugs.
3. Use four KA 4*25 screwsto f ix the hanging board to the wall. Connect the cable of
the external device to the cable
,
arrange the cables
,
and determine the cable outlet
method.
4. Hook the device from top to bottom on the mounting plate
,
and make sure that the
upper part of the hanging plate is inserted into the groove on the back of the device.
5. Fix the device and the hanging plate from the bottom with a screw.
7. Quick Screening
At this mode, fast temperature screening and automatic recording of data and face
photos can be performed. User need to download the Temperature Cloud APP to add
the device ID. Scan the QR code as follow to download the APP.
Temperature Cloud APP
8. Scan QR code to get guidance
Scan the QR code as follow to get the guidance of Face Recognition Scanner and the
instructions of the Attendance & Access Control Management Platform Software.
6. Access Control & Attendance for School
At this mode, User need to login to the Attendance & Access Control Management
Platform Software for School to add the device ID, import students and teachers’
information and their face photos and congure this device as an attendance device for
them. After the conguration is complete, the user can use the device to synchronize
data. After synchronization is complete, face recognition/temperature measurement/
access control/attendance can be started.
For detailed instructions, please refer to the guidance of the Face Recognition
Temperature Monitor and the instructions of the Attendance & Access Control
Management Platform Software for School.