User's Manual

49
3.3.6 VPN-IPSEC
VPN Settings are used to create virtual private tunnels to remote VPN.
3.3.6.1 IPSEC Settings
1. VPN-IPSEC: You could trigger the function of VPN-IPSEC if you click “enable”.
2. Netbios over IPSEC: If you would like two LAN to receive the Netbios from Network
Neighborhood, you have to click “enable”.
3. Max. number of tunnels: The device supports 1~20 tunnels.
4. Tunnel Name: Indicate which tunnel that is focused now.
5. Method: IPSec VPN supports two kinds of key-obtained methods: manual key and
automatic key exchange. Manual key approach indicates that two end VPN router setup
authenticator and encryption key by system managers manually. However, IKE
approach will perform automatic Internet key exchange. System managers of both end
gateways only need set the same pre-shared key. To setup more details configuration of
IKE and manual key, please press “more”.