User's Manual

1. WAN IPv6 address setting forIPv6 in IPv4 Tunnel: you may add remote /

local IPv4 address and local IPv6 address, then set DNS address manually for

Primary DNS address and secondary DNS address.

2. LAN IPv6 address setting: LAN IPv6 address and LAN IPv6 Link-Local

address.

3. Address auto configuration setting: Disable or enable this auto configuration

setting. You may set stateless or stateful ( Dynamic IPv6), and also check if

need to send Router advertisement messages periodically.

3.1.1.2 Internet Setup

1. WAN Interface: You may select the following WAN type for your internet

connection

ADSL WAN Type: WAN connection type of your ISP. You can click WAN Type to choose

a correct one from the following options and select PVC0~7 :

z Ethernet Over ATM(RFC1483 Bridged) with NAT

z IP over ATM(RFC 1483 Routed)

z PPP over Ethernet

z PPP over ATM

Multiple-PVC Summary table can list PVC0~7 for PVCs’ WAN type you selected.

Note : PVC0 = as main ADSL WAN