User's Manual

1. Activate WWAN for Auto-failover : Once you enable this function, you have

to input WWAN information for 3G Auto-Backups (see as WWAN 3G portion).

Host Name : ISP host name

2. IPv6 Dual-stack : You can enable / disable the function of IPv4/IPv6 stack.

3. PPPoE Account and Password : The account and password your ISP

assigned to you. For security, this field appears blank. If you don't want to

change the password, leave it blank.

4. Primary DNS/ Secondary DNS : input the Primary/Secondary DNS if

necessary.

5. Connection Control : you can choose Connect-on-demand, Auto

Reconnect(always-on) and Manually.

6. PPPoE Service name and assigned IP address : input the value if

necessary.

7. MTU : put all information here.