User's Manual

33
7. IGMP Snooping : enable or disable IGMP snooping function.
8. VLAN TAG : you may input the value of VLAN Tag by your ISP setting.
(Range : 1~4094)
B. Static IP Address
1. Activate WWAN for Auto-failover : Once you enable this function, you have
to input WWAN information for 3G Auto-Backups (see as WWAN 3G portion).
Host Name : ISP host name
2. WAN assigned IP address/ Subne mask/ Gateway IP.
3. Primary DNS/ Secondary DNS : input the Primary/Secondary DNS if
necessary.
4. NAT : If you enable this option, it will act with a NAT function.
5. NATdisable : If you enable this option, it will act with a non-NAT function.
6. Multicast : you may enable as auto mode or select by IGMP v1, IGMP v2,
IGMP v3.
7. IGMP Snooping : enable or disable IGMP snooping function.