User's Manual

6. Primary DNS/ Secondary DNS : input the Primary/Secondary DNS if

necessary.

7. MTU : Most ISP offers MTU value to users. The default MTU value is 0 (auto)

8. NATdisable : If you enable this option, it will act with a non-NAT function.

9. Multicast : you may enable as auto mode or select by IGMP v1, IGMP v2,

IGMP v3.

10. IGMP Snooping : enable or disable IGMP snooping function.

11. VLAN TAG : you may input the value of VLAN Tag by your ISP setting.

(Range : 1~4094)

D. PPTP

1. Activate WWAN for Auto-Failover: With this function enabled, when the Ethernet

WAN connection is broken, the device will automatically activate the WWAN

connection and keep you connected to internet with the alternative WWAN broadband

service. Meanwhile, if the device detected that the Ethernet WAN connection is