User's Manual

recovered, your broadband connection will be switched to use the Ethernet WAN

service

2. IP Mode: Please check the IP mode your ISP assigned, and select “Static IP Address”

or “Dynamic IP Address”.

3. Server IP and Server IP Address/Name: The IP address of the PPTP server and

designated Gateway provided by your ISP.

4. PPTP Account and Password: The account and password your ISP assigned to you.

If you don't want to change the password, keep it blank.

5. Connection ID: Optional. Input the connection ID if your ISP requires it.

6. Connection Control: Connect-on-demand is the device will link up with ISP when the

clients send outgoing packets. Auto Reconnect (Always-on) is the device will link with

ISP until the connection is established. Manually mode is the device will not make the

link until someone clicks the connect-button in the Status-page.

7. Maximum Transmission Unit (MTU): Most ISP offers MTU value to users. The

default MTU value is 0 (auto).

8. MPPE (Microsoft Point-to-Point Encryption): enable or disable this function.

9. Multicast : you may enable as auto mode or select by IGMP v1, IGMP v2, IGMP v3.

10. IGMP Snooping : enable or disable IGMP snooping function.

11. VLAN TAG : you may input the value of VLAN Tag by your ISP setting. (Range :

1~4094)