User's Manual

which wireless client can associate to the wireless LAN. If a client is denied to

associate to the wireless LAN, it means the client can't send or receive any data via

this device. Choose "allow" or "deny" to allow or deny the clients, whose MAC

addresses are not in the "Control table", to associate to the wireless LAN.

Afterwards, click on “Save” to store your settings or click “Undo” to give up the

changes.

3.2.1.5. Miscellaneous

1. Administrator Time-out: The time of no activity to logout automatically, you may set it

to zero to disable this feature.

2. Remote Administrator Host/Port

In general, only Internet user can browse the built-in web pages to perform

administration task. This feature enables you to perform administration task from

remote host. If this feature is enabled, only the specified IP address can perform

remote administration. If the specified IP address is 0.0.0.0, any host can connect with

this product to perform administration task. You can use subnet mask bits "/nn"

notation to specified a group of trusted IP addresses for example, "10.1.2.0/24".

NOTE: When Remote Administration is enabled, the web server port will be shifted to

80. You can change web server port to other port, too.

3. Discard PING from WAN side: When this feature is enabled, any host on the WAN