User's Manual

20
provider.
8. Account: Enter the new User Name for your PC card here, you can contact to your ISP to
get it.
9. Password: Enter the new Password for your PC card here, you can contact to your ISP to
get it.
10. Authentication: Choose your authentication.
11. Primary DNS: This feature allows you to assign a Primary DNS Server, contact to your
ISP to get it.
12. Secondary DNS: This feature allows you to assign a Secondary DNS Server, you can
contact to your ISP to get it.
13. Connection Control: There are 3 modes to select:
Connect-on-demand: The device will link up with ISP when the clients send outgoing
packets.
Auto Reconnect (Always-on): The device will link with ISP until the connection is ʳʳ
established.
Manually: The device will not make the link until someone clicks the ʳ
Connect-button in the Status-page.
14. Keep Alive: you can diagnose your connection by it.
iBurst Type: The WAN fields may not be necessary for your connection. The information on this
page will only be used when your service provider requires you to enter a User Name and
Password to connect with the iBurst network.
Please refer to your documentation or service provider for additional information.