User's Manual

7
LED indicators
LED color Description
Blue 3G/3.5G is on
USB LED
Blue
in flash Data access
Blue WLAN is ON
Blue in flash Data access
Wi-Fi LED
Blue in fast flash Device is in WPS Mode
Installation Steps
DO NOT switch on WiFi Mobile Router before performing the installation steps below.
Step 1.
Turn off the power switch and then plug USB 3G
Modem to the Router.
Note: The Wi-Fi Mobile Router is designed to work
with either UMTS or EV-DO and even HSUPA 3G
modem. Please refer to your service provider for
detailed feature information.
Step 2.
Plug your USB modem which is with activated USB
dongle.
Step 3.
You can choose either Power Adapter or USB Cable
for power supply.
3.1. Use Power Adapter
Connect with the power adapter to the receptor
on the back panel of it.
3.2. Use USB cable
Connect USB Cable to the same place of it.