User's Manual

3.1.1. LAN(WiFi) & WAN

3.1.1.1 Network Setup

1. LAN IP Address: The local IP address of this device. The computers on your network

must use the LAN IP address of this device as their default gateway. You can change it if

necessary.

2. Subnet Mask: Input your Subnet mask. (All devices in the network must have the same

subnet mask.) The default subnet mask is 255.255.255.0.

3. WAN Interface: This shows Ethernet WAN or Wireless WAN according to WAN mode

switch on the device.

4. WAN Type: If WAN mode switch is set to “3G”, you can see 3G, iBurst, Wi-Fi HotSpot

options from the drop-down list. Otherwise, if WAN mode switch is set to “DSL”, there

will be Dynamic IP address, Static IP address, PPP over Ethernet(PPPoE), PPTP, and

L2TP for WAN options.