User Manual

3G
For 3G WAN Networking. The WAN fields may not be necessary for your connection. The
information on this page will only be used when your service provider requires you to enter a
User Name and Password to connect to the 3G network.
Please refer to your documentation or service provider for additional information.
1. APN: Enter the APN for your PC card here.
2. Pin Code: Enter
the Pin Code for your SIM card
3. Dial-Number: This field should not be altered except when required by your service
provider.
4. User Name: Enter the new User Name for your PC card here.
5. Password: Enter the new Password for your PC card here.
6. Primary DNS: This feature allows you to assign a Primary DNS Server（Optional）
7. Secondary DNS: This feature allows you to assign a Secondary DNS Server（Optional）
8. Connection Control: There are 3 modes to select:
Connect on Demand: The device will link up with ISP when the clients send outgoing
packets.
Auto Reconnect (always-on): The device will link with ISP until the connection is
established.
Manually: The device will not make the link until someone clicks the connect-button in
the Status-page.
9. Maximum Idle Time: The Connection will be broken when the idle time arrives.
10. Keep Alive: There are 2 modes to select:
Disable / Use LCP Echo Request.
註解 [08]: For…, the WAN….