User's Manual

20
3. Connection Control: Select your connection control. There are 3 modes to select:
Connect-on-demand: The device will link up with ISP when the clients send outgoing
packets.
Auto Reconnect (Always-on): The device will link with ISP until the connection is
established.
Manually: The device will not make the link until someone clicks the connect-button in
the Status-page.
4. Allow Connection Time: Select your connection Time rule. There are 2 modes to select:
Always: Connection is always on.
By Schedule: Add new rule for the connection time rule.
5. MTU: Maximum Transmission Unit. Most ISP offers MTU value to users. The default MTU
value is 0 (auto).
6. Keep Alive: This feature must collocate with the function "Auto" of "Auto Connect".
Enable it to keep the connection always be established.
7. Bridge Ethernet Ports: This feature is enabled to modify Ethernet WAN port to LAN port.