User's Manual

19
Ethernet WAN
A. Static IP Address
1. WAN IP Address, Subnet Mask, Gateway, Primary and Secondary DNS: Enter
the proper settings provided by your ISP.
2. NAT disable: The device would not send private IP to other LAN PC if you select
disable.
B. Dynamic IP Address
1. Host Name: Optional, required by some ISPs, for example, @Home.
2. ISP registered MAC Address: Enter MAC address of your ISP. (Optional)
3. Connection Control: There are 3 modes to select:
Connect-on-demand: The device will link up with ISP when the clients send
outgoing
packets.