User's Manual

3.1.3 Wireless Settings

Wireless settings allow you to set the wireless configuration items.

1. Wireless Module: You can enable or disable wireless function.

2. Network ID (SSID): Network ID is used for identifying the Wireless LAN (WLAN).

Client stations can roam freely over this device and other Access Points that have

the same Network ID. (The factory default setting is “default”)

3. SSID Broadcast: The router will broadcast beacons that have some information,

including SSID so that wireless clients can know how many AP devices by

scanning the network. Therefore, if this setting is configured as “Disable”, the

wireless clients can not find the device from beacons.

4. Channel: The radio channel number. The permissible channels depend on the

Regulatory Domain. The factory default setting is as the following: channel 6 for

North America; channel 7 for European (ETSI); channel 7 for Japan.

5. Wireless Mode: Choose “B/G mixed”, “B only”, “G only”, “N only”, “G/N mixed” or

“B/G/N mixed”. The factory default setting is “B/G/N mixed”.

6. Authentication mode: You may select one of the following authentications to

secure your wireless network: Open, Shared, Auto, WPA-PSK, WPA, WPA2-PSK,

WPA2, WPA-PSK/WPA2-PSK, or WPA /WPA2.