User's Manual

F. L2TP

1. Activate WWAN for Auto-Failover: With this function enabled, when the Ethernet WAN

connection is broken, the device will automatically activate the WWAN connection and

keep you connected to internet with the alternative WWAN broadband service. Meanwhile,

if the device detected that the Ethernet WAN connection is recovered, your broadband

connection will be switched to use the Ethernet WAN service

2. IP Mode: Please check the IP mode your ISP assigned, and select “Static IP Address” or

“Dynamic IP Address”.

3. My IP Address and My Subnet Mask: The private IP address and subnet mask your ISP

assigned to you.

4. Gateway IP and Server IP Address/Name: The IP address of the L2TP server and

designated Gateway provided by your ISP.