User's Manual

3.3.4 MAC Control

MAC Address Control allows you to assign different access right for different users and to assign a

specific IP address to a certain MAC address.

1. MAC Address Control: Check “Enable” to enable the “MAC Address Control”. All of the

settings in this page will take effect only when “Enable” is checked.

2. Connection control: Check "Connection control" to enable the controlling of which wired

and wireless clients can connect with this device. If a client is denied to connect with this

device, it means the client can't access to the Internet either. Choose "allow" or "deny" to

allow or deny the clients, whose MAC addresses are not in the "Control table" (please see

below), to connect with this device.

3. Association control: Check "Association control" to enable the controlling of which

wireless client can associate to the wireless LAN. If a client is denied to associate to the

wireless LAN, it means the client can't send or receive any data via this device. Choose

"allow" or "deny" to allow or deny the clients, whose MAC addresses are not in the

"Control table", to associate to the wireless LAN.

Click on “Save” to store your settings or click “Undo” to give up the changes.