User's Manual

3.4.8 IPv6

This device supports several IPv6 applications. You can choose Static IPv6, DHCPv6,

PPPoEv6, 6to4, and IPv6 in IPv4 tunnel according to your requirements.

3.4.8.1 Static IPv6

1. IPv6: Disable or enable the IPv6 functions.

2. IPv6 Connection: you can choose Static IPv6 from the list.

3. WAN IPv6 address settings: you can add IPv6 address / subnet prefix length / default

Gateway / Primary DNS address and secondary DNS address.

4. LAN IPv6 address settings: you can add LAN IPv6 address, and IPv6 Link-Local address

will be showed automatically.

5. Address auto configuration setting: Disable or enable this auto configuration setting.

You may set stateless or stateful( Dynamic IPv6), and also check if need to send Router

advertisement messages periodically.