User's Manual

G. Why my 3G connection is keep dropping?

Please check 3G signal strength from your ISP in your environment is above middle

level.

4 Something wrong with the wireless connection?

A. Can’t setup a wireless connection?

I. Ensure that the SSID and the encryption settings are exactly the same to the

Clients.

II. Move the WiFi Combo Router and the wireless client into the same room, and

then test the wireless connection.

III. Disable all security settings such as WEP, and MAC Address Control.

IV. Turn off the WiFi Combo Router and the client, then restart it and then turn on the

client again.

V. Ensure that the LEDs are indicating normally. If no, make sure that the AC power

and Ethernet cables are firmly connected.

VI. Ensure that the IP Address, subnet mask, gateway and DNS settings are correctly

entered for the network.

VII. If you are using other wireless device, home security systems or ceiling fans,

lights in your home, your wireless connection may degrade dramatically. Keep

your product away from electrical devices that generate RF noise such as

microwaves, monitors, electric motors…

B. What can I do if my wireless client can not access the Internet?

I. Out of range: Put the router closer to your client.

II. Wrong SSID or Encryption Key: Check the SSID or Encryption setting.

III. Connect with wrong AP: Ensure that the client is connected with the correct

Access Point.

i. Right-click on the Local Area Connection icon in the taskbar.

ii. Select View Available Wireless Networks in Wireless Configure. Ensure you

have selected the correct available network.

iii. Reset the WiFi Combo Router to default setting

C. Why does my wireless connection keep dropping?

I. Antenna Orientation.

i. Try different antenna orientations for the WiFi Combo Router.

ii. Try to keep the antenna at least 6 inches away from the wall or other objects.

II. Try changing the channel on the WiFi Combo Router, and your Access Point and

Wireless adapter to a different channel to avoid interference.

III. Keep your product away from electrical devices that generate RF noise, like

microwaves, monitors, electric motors, etc.