User's Manual Part 1

Chapter 錯誤! 尚未定義樣式。 - 錯誤! 尚未定義樣式。
錯誤! 尚未定義樣式。
2-4
LED Function Status Description
On
An active station is connected to
the corresponding LAN port.
LAN LINK/ACT
1~4
LAN Status
Blinking
The corresponding LAN port is
sending or receiving data.
On
Data rate is 100 Mbps on the
corresponding LAN port.
LAN SPEED 10/100
1~4
LAN Port
Data Rate
Off
Data rate is 10 Mbps on the
corresponding LAN port.
On
The ODU port is connected to the
ODU.
ODU LINK/ACT
ODU Port
Activity
Blinking
The ODU port is sending or
receiving data.
On Data rate is 100 Mbps
ODU 10/100 ODU Port
Data Rate
Off Data rate is 10 Mbps
ODU WLINK
ODU Wireless
Link Status
On The ODU is connected with an AU
RESET ROUTER Button
Press momentarily the recessed button to reset the Wireless Networking
Gateway IDU.
Resetting the IDU to Factory Defaults
Press the RESET ROUTER button for 5 seconds at least, until the
STATUS LED flashes 5 times. After releasing the button, the unit will
resume operation with the factory default configuration.
刪除: 3
刪除: 3
刪除: Operation and
Administration
刪除: Installation