User's Manual Part 1

Chapter 錯誤! 尚未定義樣式。 - 錯誤! 尚未定義樣式。
錯誤! 尚未定義樣式。
3-26
 RTS Threshold – Specify the packet size above which a Request To
Send will be performed (the range is 256~2432, the default is 2432).
 Fragmentation Threshold – Specify the packet size above which
fragmentation will be performed (the range is 256~2346 even
numbers only, the default is 2346).
 DTIM Interval – [TBD]
 Wireless Mode – The wireless mode supported: 802.11b, 802.11g, or
both.
 TX Rates – Select the transmission rate from the dropdown list.
 Preamble Type – Select short/long or automatic preamble to be
assigned to each packet.
 Authentication Type – [TBD]
 SSID Broadcast – [TBD what is SSID?] Enable/Disable broadcasting
the network's ID.
 Antenna Transmit Power – Select the antenna's transmission power
from the dropdown list.
MAC Address Control
MAC Address Control allows you to assign different access rights for
different users and to assign a fixed IP address to a specific MAC
address.
NOTE
All the settings in this page will take effect only when MAC Address Control is set to
"Enable".
刪除: 3
刪除: 3
刪除: Operation and
Administration
刪除: Operation and
Administration