User's Manual Part 1

Chapter 錯誤! 尚未定義樣式。 - 錯誤! 尚未定義樣式。
錯誤! 尚未定義樣式。
3-28
 Control table - Each row in the control table indicates the MAC
address and the mapped IP address of a single client. The table
shows the following parameters:
¾ MAC Address – The MAC address of a specific client.
¾ IP Address – The expected IP address of the corresponding
client. Leave empty if you do not want to specify an IP
address for the corresponding client.
¾ C - When "Connection control" is checked, checking "C" will
allow/deny (depending on the connection control setting) the
corresponding client to connect to this device.
¾ A - When "Association control" is checked, checking "A" will
allow/deny (depending on the association control setting) the
corresponding client to associate to the wireless LAN.
 DHCP clients Combo box – Facilitates the process of entering the
MAC address.
Select a specific client in the "DHCP clients" Combo box and click on
Copy to to copy the MAC address of the selected client to the
selected ID in the "ID" Combo box
The control table is divided into several pages. Use the << Previous
page and Next Page >> buttons to jump to a different page.
Change Password
The Change Password window allows you to change the system
password. For security reasons, it is strongly recommended that you do
so.
1. Select Basic Setting > Change Password submenu on the menu list.
The Change Password window opens.
To access change password:
刪除: 3
刪除: 3
刪除: Operation and
Administration
刪除: Operation and
Administration