User's Manual Part 2

Chapter 錯誤! 尚未定義樣式。 - 錯誤! 尚未定義樣式。
錯誤! 尚未定義樣式。
3-52
Example:
Configuration on NAT Router
Destination Subnet Mask Gateway Hop Enabled
192.168.1.0 255.255.255.0 192.168.123.216 1 ˇ
192.168.0.0 255.255.255.0 192.168.123.103 1 ˇ
If, for example, Client3 wanted to send an IP data gram to 192.168.0.2
(Client2), he would use the above table to determine that he had to go
via 192.168.123.103 (Gateway2).
And if he sends Packets to 192.168.1.11 he will go via 192.168.123.216
(Gateway1).
Each rule can be enabled or disabled individually.
After the Routing Table setting is configured, click Save.
Schedule Rule
Schedule Rule allows you to set the schedule time for which a service
will be turned on or off.
刪除: 3
刪除: 3
刪除: Operation and
Administration
刪除: Operation and
Administration